3M IJ180mC-10 Cast Gloss Wrap Film

• Gloss finish
• Comply Adhesive with micro technology provides excellent air release for smooth results
• Pressure-activated adhesive for easy sliding, tacking, snap-up and repositioning
• Excellent hiding power due to the grey adhesive
• This film is flexible and conforms to compound curves, corrugations and rivets
• Many finished graphic constructions can be stretched up to 130% (i.e., a 10 inch [25 cm] piece of film can stretch to 13 inches [33 cm]) without primer or relief cuts and maintain lift resistance
• Removable with heat and/or chemicals
• Expected Performance Life of 10 years (unwarranted period for unprinted film with no graphic protection, applied to a flat, vertical, outdoor surface)
• Excellent liner release

Recommended types of graphic and use:

• Indoor and outdoor graphics and signs
• Wraps for vehicles, straight trucks, semi-trucks and semi-trailers
• Bus graphics
• Rail car graphics (excluding stainless steel)
• Watercraft graphics (above the static water line only)
• Point-of-purchase graphics and displays, emblems or striping
• Decorative and identification graphics
• Cautionary and safety labeling
• NOTE: The application of film onto glass can cause glass break by uneven heat absorption through sun exposure. 3M does not accept liability for glass breakage.