Structural Adhesives

3M Scotch-Weld 3731-TCQ Hot Melt Adhesive is a 100% solids, high heat resistant thermoplastic adhesive that liquefies to bond to a variety of substrates, including polyethylene, polypropylene, and other plastics.

3M large structural adhesive applicator guns for 200ml, 250ml, 400ml and 490ml formats. Available in manual or pneumatic models.

An adhesive applicator gun with plunger that works with with 1:1 50mL, 2:1 37mL and 3:2 43mL cartridges. Separate plungers can be ordered for the 10:1 37mL cartridge.

3M Scotch-Weld EPX Mixing Nozzles provides efficient application of 3M Scotch-Weld Structural Adhesives in Duo-Pak (DP) cartridges. Each nozzle provide thorough mixing and precise placement of two part adhesives and potting compounds.

1Shot ZZ5005 Metal Bond is a clear, single component adhesive designed to provide excellent adhesion over hard-to-adhere-to metals.

3M Scotch-Weld Acrylic Adhesive DP8405NS is a toughened, non-sag, two part MMA based adhesive. It has a 10:1 mix ratio, a 5 minute worklife, and handling strength in approximately 14 minutes. It adheres to a variety of plastics or metals, including those with slightly oily surfaces.

3M DP8425NS Scotch is a green coloured, high performance, two-part acrylic adhesives that offer excellent shear, peel, and impact performance. These toughened products provide improved adhesion to many plastics and metals, including those with slightly oily surfaces. 23 minute work life with 53 minutes to structural strength, 10:1 mixing ratio.

Scotch-Weld Flexible Acrylic Adhesive DP8610NS is a black, non-sag, low odour, two-part acrylic adhesive with non-flammable classification. 

3M DP8705NS Scotch-Weld is a black coloured, low odour acrylic adhesive that is non-flammable and reduced toxicological hazard profile for a safer working environment compared to typical acrylic adhesive. This adhesive bonds with a variety of substrates, including metals, painted surfaces, plastics, and composites. It requires minimal surface preparation and can perform in low temperature with structural strength down to -40C (-40F). 10:1 mix ratio. 

3M DP8725NS Scotch-Weld is black in colour, it is low-odour, non-sag, two-part structural acrylic adhesive that is non-flammable and has the ability to bond to a variety of different substrates.