Excalibur 5000 Vertical Substrate Cutter, 63"
With the Excalibur 5000 vertical cutter you can instantly swap from cutting corrugated fluted plastic, mountboard, to glass, to MDF. All of the blades cut down the same line, so that all materials are square and accurately cut to ensure a perfect frame fit. Alignment is fast and easy with the flip in/out measuring stops which help whether you are setting-up for a one-off job, or volume production cutting.
After a simple initial set-up, the cutter maintains permanent 90-degree accuracy. A one-piece, horizontal squaring arm ensures positioning and rigidity either side of the cut line and accuracy is assured with a clear sightline strip acting as your guide to precise alignment. Materials are then held firmly by a unique pressure-sensitive clamp, which is designed to protect delicate surfaces from damage.
Material this unit can cut:
- Mountboard, Conservation board
- MDF ≤ 3mm (up to 3/32″)
- Cast acrylic / Plexiglas ≤ 3mm (up to 3/32″)
- Glass ≤ 6mm ( up to 1/4″)
- Foam centred board ≤ 13mm (up to 1/2″)
- Cardboard ≤ 13mm (up to 1/2″)
- PVC Foamboard (up to 1/2")
- Corrugated fluted plastic boards (up to 1/2")
(FOR ACM/ACP cutting please refer to the Keencut SteelTrak)
Included in the box are: 100 medium duty utility blades, Two glass cutting wheels (1 is mounted), Twin wheel cutter (mounted)
