BannerBrite 8oz 1000D Mesh Banner with Liner

An 8oz, 1000 denier strength banner mesh with removable liner that offers 35% air flow. NFPA 701 fire rated for interior POP or tradeshow use, this product is ideal for any indoor or outdoor application where air flow-through or visibility show-through is desired. It offers a cold crack rating of -20C.The protective liner on the back makes the printing process easier by preventing ink spray through and helping the media to feed easily through the printer. After printing, the lining is easily removed. The product is also available without a liner.

Applications include interior retail POP, hanging signage, in-ice graphics, posters, way-finding signage, fence and bridge signage, building facades, elevator shaft covers and much more.

This product is compatible with solvent, eco-solvent, UV-cure and HP Latex Gen-3 Printer series and newer. Care must be taken with curing heat when printing with latex (less than 200C is recommended), or the liner will become difficult to remove from the back of the mesh.  This product is not compatible with HP L-Series Latex Printers.