Fasara Decorative Glass Finishes
3M Fasara is a line of 2mil polyester decorative glass films that provide the look and feel of etched, cut sandblast and textured glass. These 2mil films are PVC-free and can be wet applied to virtually any interior glass surface from entrances, doors, windows and partitions to ceilings, balconies stairwells and more. The films require no extra hardware, and no additional maintenance or special cleaning. Minimum application temperature is +16C. Products are not recommended for interior applications where condensation consistently occurs. Fasara films are not rated for printing and have various surface textures, therfore printing is on a user test and approve basis only. No
warranty is made for the quality or durability of printed material.
Electronic cutting, weeding and application tape with Fasara is NOT recommended. The type of liner used is not intended for electronic cutting and there is currently no recommended application tape that adheres properly to the face to hold cut shapes in place.
Please refer to the 3M Fasara Catalogue link below to see all available patterns and gradations. All gradations run the WIDTH of the roll.
Electronic cutting, weeding and application tape with Fasara is NOT recommended. The type of liner used is not intended for electronic cutting and there is currently no recommended application tape that adheres properly to the face to hold cut shapes in place.
Please refer to the 3M Fasara Catalogue link below to see all available patterns and gradations. All gradations run the WIDTH of the roll.
Read More
Type: | 2 mil, Polyester |
---|---|
Adh: | Permanent |
Adh Col: | Clear |
Finish: | Gloss, Matte |
Durability: | Up to 5 years |