Put your Worktable to Work: #3 – Premasking
The innovative Rollover flatbed applicator is a work table that can apply, mount, laminate, back light and much more. The last two videos covered application, and lamination. In this video, Svein from Rollover demonstrates how the Rollover can be used to make premasking effortless!
Here’s how:
1- Place the two brackets in the fitting supports by the roller ends.
2- Place the spindle in the inner position on the roller.
3- The roll of premask tape should then rest between the spindle and the roller with the adhesive side down.
4- Tighten the tape underneath the roller, lower it, and apply in one smooth action.
Find out more
To find out more about the innovative Rollover, click here.
Share the post "Put your Worktable to Work: #3 – Premasking"
Share this article:
Thanks for reading our post. The knife is a telescopic slider cutting tool, you can find it here: http://bit.ly/1yTROWC
Amanda