1-888-634-7274 | Live Chat
Welcome, [ Sign in      Register ]    |    Français

Put your Worktable to Work: #2 – Laminating using a pre-cut sheet with the Rollover

Posted by
Jan 13, 2014 10:00am
Posted in: Cool Tools, Offcuts

The innovative Rollover flatbed applicator is a work table that can apply, mount, laminate, back light and much more. In this last video, we showed you how easily graphics can be applied to rigid and flexible media! In this video, Svein from Rollover demonstrates how the Rollover makes laminating easy by laminating a pre-cut sheet of laminate onto a graphic in seconds!

Here’s how:

1- Begin by applying your graphic onto a substrate as shown in video 1.

2- Cut a piece of laminate that’s approximately the same size as your graphic.

3- Place your laminate in the correct position and lower the roller.

4- Fold the laminate over the roller and remove the backing paper. You can also fold over the backing paper, instead of cutting.

5- Apply the starting section of the laminate.

6- lift and place the roller just in front of the applied section, allowing you to catch the backing paper of the remaining piece.

7- Remove the backing paper simultaneously, while applying the remaining laminate.

Stay Tuned

In the next video we’ll show you how the Rollover makes premasking trouble-free!

Find out more

To find out more about the innovative Rollover, click here. You can also request information or a quote by calling 1-888-634-7274 or:

>>Request a Rollover Quote!<<

 


Comments


Leave a reply